Veggie Garden in 8 Hours

This was one of my favorite projects, but I have to admit, I was not prepared for the level of work this was going to take. If you already have a spot with no grass, or an existing garden to work with, I envy you. We picked the spot on the side of our house that the dogs cannot reach and started digging. Holy crap was this a lot of work. The digging was fun, but I was thinking ok, this is going to take 30 mins. WRONG. Our garden is 8X4. Which really isn’t even all that big. We were going to do 8×8 because we’re ambitious and I’m a crazy tomato lady. I want hundreds of tomatoes. I want enough tomatoes to create my very own little Italy in our neighborhood. But, I’m glad we scaled it back for our first garden experience because all my digging muscles hurt for two days.

Here’s what you’ll need:

  • 4×4 pressure treated wood
  • Wood rails (you decide the length) pressure treated
  • Shovel or tiller
  • Deck screws
  • Soil
  • Plants to grow!

Here’s the area we started with. We took on piece of wood and placed it on the ground so we could start outlining the area our garden was going to be.

Digging the grass out and turning soil took 2-3 hours. The best advice I can give you is to wait until after it rains to start digging. It rained for almost 3 straight days before we started our garden, making the ground very pliable. We dug about 8 inches down and 16 inches in the corners. SUPER IMPORTANT: Spend the time to remove all the weeds grass, roots, and whatever else you see that can be disruptive to your veggies growth. This will also eliminate a serious amount of weeding that you’ll need to do in the future.

IMG_1645

This hand tiller really helped us turn the soil and find things in the ground that needed to be removed.

You’ll need a 4×4 cut down into 4 posts. Ours were just over 12 inches. We used scraps from a previous project. We used pressure treated wood so the frame wouldn’t degrade in the elements over time.

You’ll need wood screws to join the post to the frame for the garden bed. This part took maybe 20 mins and we did it on a flat surface. It was the easiest part of the project. Continue to work around the 4 sides screwing the frame into the 4×4 posts. Remember, the posts will go down into the ground. So when you’re screwing, line them up with the end of the post, not the middle.

Once the frame is finished, place it over the garden. You might need to reshape the corners of your garden if they’re not perfectly square. After the frame is in place, push the dirt around the edges to secure the posts into the ground and close any spaces between the wood and the ground.

A garden rake wil help you accomplish this step with speed. It will also bring to the surface any large rocks, weeds, or roots that you may have missed before.

IMG_1730

Once you’re happy with your foundation, you can add the soil! We used an all-purpose garden soil that Home Depot had one sale. We were trying to do this on budget, so sale soil it was! We used 14 bags of soil in total. Take a look at the measurements on the bag. It’ll tell you how many bags you need according the the square footage of your garden.

We put 10 bags of soil down, then we starting spacing out our plants. Pay attention to how far apart each plant needs to be from one another. In all honesty, we cheated a few inches. But it’s important that you give them some space so the roots don’t choke each other.

IMG_1734

Once you have all the place in their positions, you can add the remaining bags of soil. Depending on what kind of veggies you got, you’ll need to burry them at different depths. Pay attention to the watering requirements and depth requirements of each plant! Water them right away! They’ll need to adapt to their new environment and the best way to do that is to feed them!

IMG_1735

We planted 4 different types of tomatoes, 3 different types of sweet peppers, serrano and jalapeño peppers, eggplant and strawberries! I’ll let you know in 6-8 weeks if this was worth it! 🙂

Linen Closet Shelving

The days of forgetting a towel and running naked through the upstairs to the hall closet are officially OVER! We DIYed closet shelves!

When we redid our master bath, we removed a huge jacuzzi tub to make room for a custom shower and a linen closet, something our bathroom was lacking. After the bathroom was finished we never got around to actually putting shelves in the closet. For a while the vacuum and a step ladder lived in there.

img_1081

Thats me! I need a hair cut, so I’ve been told. I’m 5’9″. So this is a really large closet. Can you see the excitement on my face about getting some shelves in here? WOO.

We opted not to use wire shelving because I kinda have OCD. It drives me BONKERS when things don’t stand up straight because they’re an awkward width. For example, a shampoo bottle might lean to the right a little bit because it’s between the wires. I can’t live my life like that. I struggle with this shelving crisis in our laundry room. Honestly, it makes me dizzy. So we went with wood!

This DIY involved some power tools. So make sure you’re prepared if you’re opting for wood like we did!

img_1120

Obviously we’re Ryobi fans. The batteries are awesome. They last a really long time and they charge quickly. On the left is the cordless circular saw, on the right is some kind of super drill. It’s awesome. Shortly after we bought our house we invested in the Ultimate Ryobi Combo Kit. It was a little pricy, but it was completely worth it. We’ve used every tool in the kit and the bag is perfect to keep tools securely stored. Now we have no excuse to lose any tools!

The Home Depot rocks. If you don’t have one near you, I apologize. Home Depot is usually our first stop for every DIY. Our “wood” shelving is actually MDF particle board. It’s really light weight and ridiculously easy to work with. The entire piece of particle board was $26 and they cut it to the size we specified right in the store so we were able to fit it in the car with ease.

 

We also picked up framing wood (actual wood) and made rails to hold the shelving in place.

When we got home I was so excited to start hammering and cutting and screwing stuff in place that I completely forgot that I needed to paint the wood. This DIY was super cheap, but it took us two weeks to execute because we needed to wait 24 hours for the paint to dry and multiple coats to cover the wood… and I’m too lazy to DIY when I get home from work, so we wait for the weekends. However, it only took around 4 working hours to paint (minus dry time) and hang the rails.

img_0889

I used Behr Ultra White to paint the MDF board and the wood rails. Our basement is gross… don’t look at this picture too hard. You will start to feel the cobwebs.

 

That’s my hot design assistant. Full disclosure: For this project though he was the boss and I was the assistant. He’s measuring the bottom shelf, cutting the wood rail to size and screwing it into the wall. If you can’t find studs in the wall, make sure you’re using anchors. The shelves will be too heavy once you put stuff on them to stay in place unsupported. Also, it’s easier to start from the bottom and work your way up. Maybe it’s not, but that’s what we did.

 

After we got in the first rails we tested placing the shelf on top. It fit really well, but we added a second piece just to make sure that the shelf wouldn’t accidentally drop. We repeated the process 4 more times. We opted to do a half shelf on top because we wouldn’t really be able to reach back on a shelf that’s 6 ft.

Here’s the final result! No more naked sprints and flinging water all over the upstairs! WOO!

fullsizerender-2

Industrial Shelving

I feel like we live at Home Depot. Our relationship with Home Depot is similar to most people’s relationship with Target. You come for one thing and you end up leaving with 100. The guy at the paint counter and I are on a first name basis. He’s the man. So last weekend, during our 9th trip to Home Depot of the week, we were looking for some wood to build shelving in our Master Bath and we saw these industrial pipe kits on sale. So immediately the wheels in my little DIY mind start turning. Brian was intrigued and then all of a sudden it was like he knew. He knew we came to do one shelving project and were going to leave with two. So here’s what this corner of our bathroom looked like to start with:

img_0898

The tile on the wall is NY SoHo tile from a whole sale tile place a few miles from our home. The Master Bath is by far my favorite room in the house and the largest transformation so far. I’m actually really surprised that its taken me this long to decorate.

Here’s the packaging and how the mount was organized. Everything we needed to hang the flange was included right inside this package. Stuff like this makes my heart dance. There’s no need to run around and figure out what kind of anchor you need or if you have the correct kind of screw.

I used the Ryobi Compact Laser Level to hang the mounts. This gadget is seriously worth every penny. I use it to hang stuff all the time!

img_0902

So once I got the level set, I took the wall flange and drew circles in the holes so I would know where to drill.

Buying wood at Home Depot is super easy! They even cut it for you, if you don’t have a table saw at home you don’t have to worry about fitting it in your car. Originally Home Depot cut the wood, but we needed to take a little more off when we saw how oversized it looked on the wall. I stained it using Minwax Honey and let it dry overnight.

Here’s the styled final product! I made the sign with a scrap piece of wood I had!

img_0943

Dining Room Update

Hey friends! Our dining room is a huge part of our home. Growing up in my parents house we used the dining room on Christmas day and that was pretty much it. Brian and I host constantly so I want this to be a room that people enjoy spending a lot of time in. There are few things that bring more joy to our lives than seeing memories being made in our home.

That being said, our dining room needed a much needed face lift. If I haven’t said it before, I HATE the wall color that the bank painted our home. Don’t get me wrong, I’m so thankful I didn’t have to deal with another persons insane color choices or wall paper from the 80’s. The paint we have is a step above all that. However, if I had to describe it, I would say it’s a dingy white paint and chalk mixture. If I’m wearing black I avoid grazing the walls because it will leave a chalky residue on my clothes. So annoying. Not to mention it looks kind of dirty. Here are some before pictures.

This space looked dull in comparison to my dreams of a warm space that people would have a hard time leaving.

So let me just brag for a second about the most outstanding husband in the world… Brian is a stud. We volunteered to host Thanksgiving this year and I got the brilliant idea we need to paint the dining room in order for Thanksgiving to be perfect. Brian didn’t say a word, he grabbed his paint brush started to help. We started on Monday night and did most of the trim. Tuesday we decided that I was insane and we needed a pro to help. So Brian went out to Home Depot and picked up a paint gun. Let me tell you… if you don’t have one, INVEST. It is the most amazing tool in the universe. I thought I was excited about my sander, I’m in love with this paint gun. We covered the walls in 20 mins and if we knew what we were doing or had a strategy, we would have been able to paint the whole room in one night.

Check it out.

img_0318

You need to give yourself about 16 inches of buffer space, but this saved us HOURS and it was fun to use!

Here’s the final result!

It looks so fresh and warm. The paint color is Wheat Bread by Behr.

Foyer Update

It’s amazing what some paint will do to a room. We have this sandy off-white paint on every wall in our house. I think the bank that owned the house paid a very sloppy contractor to come in and paint over everything. The off-white color isn’t even a pretty egg-shell color. It almost looks like they used an old can of white paint and didn’t mix it all the way. It looks yellow next to the white trim. Sometimes I swear I can see inconsistencies on the walls. Here’s what the foyer looked:

img_3475

I also could not stand the color of the wood on this door. So everything in the foyer got a nice facelift! I LOVE dark wood stains. So I used the same wood stain, Kona, from our Half Bath Reno.

Taping all of those windows was really annoying but it made cleaning the glass a lot easier! I’m thinking about doing a mercury glass effect on them. The contractor that installed them got glue ALL OVER the glass and I can’t get it off!

Here’s the new look!

img_3690-2

The stair rail got an update too! Check out the details here.

I found the most perfect little table to go under the mirror also. Check out the details on the mid century side table up cycle here.

img_4021